The store will not work correctly when cookies are disabled.
We use cookies to make your experience better.To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
K&N Air Intake under the hood of Hyundai Veloster Turbo
If you told someone ten years ago "I drive a Hyundai," they would almost immediately think of a car with lackluster horsepower, boring styling and minimal features, but with good fuel economy and affordable maintenance - the economical choice. Today though, Hyundai is different. They've matured. While still maintaining excellent fuel economy and inexpensive maintenance they now craft vehicles with impressive styling and respectable horsepower.
K&N Air Intake System for Hyundai Veloster Turbo
With a new turbocharged engine option for the 2013 model year, the 2013 Hyundai Veloster 1.6 liter turbo is all of these things Hyundai now represents. It's an avant-garde take on the "hot hatchback" with 3 actual doors (not just two doors plus the rear hatch) and aggressive styling, while still hitting the mandatory hot-hatch check boxes of sporty handling, ample cargo space, healthy horsepower, and fuel efficiency. And now, owners of the 2013 Hyundai Veloster 1.6 liter turbo can give their vehicles a guaranteed increase in horsepower and performance with the K&N 69-5312TS Typhoon performance air intake system.
The 69-5312TS is expert engineered to increase horsepower and acceleration, utilizing a mandrel-bent aluminum intake tube to streamline airflow into the turbocharger. The RU-4990 conical air filter on the inlet is oversized to help minimize restriction while still providing excellent air filtration and protection. The filter is also washable and reusable and can go for up to 100,000 miles between cleanings depending on driving conditions. The 69-5312TS comes with a unique two-piece heat shield to protect incoming air from heat under the hood and the system maintains all necessary factory connections. The high-quality finish on the tube doesn't just look fantastic either- it's a durable finish that will maintain its sheen for years and years to come.
Dyno Chart for K&N Hyundai Veloster Turbo Air Intake 69-5312TS
The fit and finish of the 69-5312TS air intake are only half the story though. The other half is the robust power gain. On the dyno, the 69-5312TS produced an estimated additional 12.9 horsepower at 4547 rpm and 16.2 pound feet of torque at 3523 rpm over the stock air intake. Those are substantial gains, especially for a smaller 1.6 liter engine.
Like all K&N 69-series Typhoon performance air intake systems, the 69-5312TS is backed by K&N's famous Million Mile Limited Warranty. It can be installed in approximately 90 minutes with the provided step-by-step instructions and basic hand tools, and does not require any additional modifications to the vehicle in order to provide an increase in horsepower and acceleration.
The 2013 Hyundai Veloster 1.6 liter turbo delivers on Hyundai's modern motifs in spades - fuel efficient, affordable, stylish and powerful. It's a respectable and exciting vehicle that definitely shakes up the hot hatchback market, and with the help of the K&N 69-5312TS performance air intake system, owners can take their Veloster to the next level of excitement.
Performance air intake 69-5312TS is guaranteed to increase horsepower on the Hyundai Veloster Turbo listed below:
2016 Hyundai Veloster Turbo 1.6L L4
2015 Hyundai Veloster Turbo 1.6L L4
2014 Hyundai Veloster Turbo 1.6L L4
2013 Hyundai Veloster Turbo 1.6L L4
The K&N E-4974 washable and reusable air filter is available for numerous Bobcat loader, excavator and tractor models. This air filter is constructed with K&N’s Hybrid media which is a non-woven synthetic material that is designed to be used dry and without air filter oil. Each high flow Hybrid air filter features lofted three-dimensional material which provides excellent filtration and large dust holding capacities.
The E-4974 performance air filter will protect your Bobcat engine, and your wallet, as you will no longer need to replace it repeatedly as you would with a disposable air filter. Since the E-4974 air filter is washable and reusable, when it does become dirty enough to need cleaning, it is very easy to clean using K&N Synthetic Air Filter Cleaner (99-0624). Simply remove the air filter from the Original Equipment (OE) housing and carefully shake off any loose dirt and debris, spray the cleaner on the air filter and let it soak for 10 minutes, then rinse the air filter out until the water runs clean. The K&N E-4974 air filter can be conveniently cleaned with low-pressure power washers, pressure sprayers or hose nozzles. Once dry simply reinstall the air filter and you are good to go.
The K&N E-4974 air filter comes with a one year limited warranty. K&N air filter E-4974 provides low restriction and outstanding engine protection to the Bobcat models listed below.
The Chevy Spark is a mini car that gets great gas mileage and has more room than you might think. Five doors make it easy for passengers to access the four seats.
K&N has a performance air filter 33-3001 for the 2010-2014 Chevrolet Spark with 1.0 liter and 1.2 liter engines. See application specifics below. This air filter is designed to increase horsepower and torque while protecting the engine by providing excellent filtration. This OE replacement air filter is easy to install and has been engineered to fit in the factory air box that comes stock with the Chevrolet Spark.
Side View of the K&N Chevy Spark Air Filter 33-3001
As with all K&N stock replacement air filters, the 33-3001 is washable and reusable and comes with our Million Mile Limited Warranty. This means the filter is both economical and environmentally friendly. Paper filters need to be thrown away every time they get dirty while a K&N air filter can be used over and over again. This K&N high flow air filter is made with a special oiled cotton media allowing it to be used up to 50,000 miles between cleanings depending on driving conditions. This helps reduce waste from disposable air filters. It is also easy to clean using our Recharge Kits (part numbers 99-5050 and 99-5000) that are available in most auto parts stores. This filter is emissions legal in all 50 U.S. States and will not void your vehicle warranty.
The 33-3001 fits the following Chevy Spark models:
2014 CHEVROLET SPARK 1.2L L4 - Non-US
2014 CHEVROLET SPARK 1.0L L4
2013 CHEVROLET SPARK 1.2L L4 - Non-US
2013 CHEVROLET SPARK 1.0L L4
2012 CHEVROLET SPARK 1.2L L4
2012 CHEVROLET SPARK 1.0L L4
2011 CHEVROLET SPARK 1.2L L4
2011 CHEVROLET SPARK 1.0L L4
2010 CHEVROLET SPARK 1.2L L4
2010 CHEVROLET SPARK 1.0L L4
From the mid-1990s until the last few years, the midsize sedan market has been dominated by Japanese auto manufacturers and for a while, it looked like the Americans were going to be displaced entirely. Fueled by Yankee ingenuity in the face of adversity, Ford has brought a strong contender back to this segment with the Ford Fusion and they did not just come to play - they came to win.
The 2013 to 2016 Ford Fusion gets a complete overhaul from 2012 and the results are quite impressive. Along with numerous technological upgrades and more space inside the cabin, the base engine, a 2.5 liter four cylinder, produces a stout 175 horsepower while still offering an estimated 34 miles per gallon on the freeway. Now, owners of the 2013 Ford Fusion with 2.5 liter engine can have a guaranteed increase in horsepower and performance with K&N's 69-3533TTK Typhoon performance air intake system.
K&N Air Intake System for Ford Fusion
The 69-3533TTK performance air intake system is precision engineered to fit the 2013 to 2016 Ford Fusion 2.5 liter. It comes with a mandrel-bent aluminum intake tube to help streamline airflow into the engine and a heat shield to protect incoming air from radiant heat under the hood. The intake tube is powder-coated black for a sleek look, and this specific air intake system utilizes a venturi inside the tube to straighten the airflow across the mass air flow (MAF) sensor for proper readings. The RC-3950 air filter on the end of the 69-3533TTK air intake system is oversized to help reduce restriction but without sacrificing filtration efficiency. The air filter is also washable and reusable and can go for up to 100,000 miles between cleanings depending on driving conditions.
Dyno Chart for K&N Ford Fusion Air Intake 69-3533TTK
On the dyno, the 69-3533TTK performance air intake system produced an estimated additional 6.7 horsepower at 5929rpm and 7.4 pound-feet of torque at 4716rpm to the wheels over the stock intake system.
The 69-3533TTK is backed by K&N's famous Million Mile Limited Warranty and Consumer Protection Pledge. It can be installed in approximately 90 minutes using basic hand tools. Also, the system maintains the factory MAF sensor, crankcase ventilation, and evaporative emissions control system connections and will work within the factory Engine Control Unit (ECU) tuning.
The era of blasé midsized American sedans is over with the 2013 Ford Fusion 2.5 liter. Its European exterior styling and bountiful technological accoutrements make it a top-notch contender in its class. It is now simple for owners to add some "go" to the "show" of this superb sedan with the K&N 69-3533TTK Typhoon performance air intake system.
Performance air intake 69-3533TTK is engineered to fit the models listed below:
2016 Ford Fusion 2.5L L4
2015 Ford Fusion 2.5L L4
2014 Ford Fusion 2.5L L4
2013 Ford Fusion 2.5L L4
Related news stories to the Ford Fusion:Ford Fusion Receives Horsepower Increase Worthy of the Stock Car Racing Circuit; 2006 & 2007 Ford Fusion Owners Add Guaranteed Horsepower with K&N Air Intake
2012 to 2015 Chevy Camaro ZL1 6.2L Air Intake Installation - 63-3079
This air intake installation video features K&N 63-3079 performance air intake modification for 2012 to 2015 Chevy Camaro ZL1 6.2L. K&N's 2012 to 2015 Chevy Camaro ZL1 6.2L air intake system showed an estimated gain of 31.7 horsepower at 4300 RPM when tested on the K&N dynamometer. Discover how easy it is to install power-gaining performance on your 2012 to 2015 Chevy Camaro ZL1 6.2L.
K&N 63-3079 Air Intake Installation Video for 2012 to 2015 Chevy Camaro ZL1 6.2L
Visit K&N's 63-3079 Air Intake page for more information.
