The store will not work correctly when cookies are disabled.
We use cookies to make your experience better.To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
2010, 2011, 2012 & 2013 Kia Forte 2.0L and Forte Koop 2.4L Air Intake Installation
K&N's 2010, 2011, 2012 & 2013 Kia Forte 2.0L and Forte Koop 2.4L air intake system adds style and power. This textured black K&N 69-5307TTKcold air intake showed an estimated horsepower gain of 6.6 at 4800 rpm. Watch as K&N installs this simple air intake modification as a guide for 2010, 2011, 2012 & 2013 Kia Forte models with the 2.0 liter and Forte Koop with the 2.4 liter engine.
2010, 2011, 2012 & 2013 Kia Forte 2.0L and Forte Koop 2.4L Air Intake Installation
Here's a little Ford truck 101. In 1900 Henry Ford built his third vehicle - it was a truck. Seventeen years later Ford introduced the Model T one-ton truck chassis, the first ever chassis built specifically for trucks. In 1925 the first factory-assembled Ford pickup became available with a sticker shock busting price tag of $281.
The new truck was outfitted with a cargo box, an adjustable tailgate, four stake pockets and heavy duty rear springs. In 1975, during the lingering haze of bellbottoms and paisley shirts, the Ford F-150 first debuted and immediately locked its hold on the American truck market. Since then it han't just been the best selling truck, but the best-selling vehicle in U.S. Evolution in terms of power and variety of features, which is why the F-150 holds tight to its top-dog status.
The Ford F-150 continues to lead the way by offering 10 different trim levels ranging from bare-bones basic to leather-trimmed lavish, with three different bed styles and a selection of engines that vary from a twin-turbo V6 to a 6.2-liter V8. There's also Ford's Sync technology, which makes connecting and using cell phones in hands-free mode easy.
K&N clearly understands and appreciates this amorous relationship between drivers and their Ford F-150 truck, and to that end they have created a line of simple performance upgrade options specifically geared for them. Starting at the top with K&N's washable and reusable Ford F150 air filters, these premium woven cotton media filters can be used for up to 50,000 miles before cleaning is needed, depending on driving conditions, and they have a one-million mile limited warranty. Upgrading to a K&N air filter is as easy as replacing the factory installed air filter.
Many truck owners are so impressed by the performance gains they receive from simply upgrading their air filters, that they often go one-step further with K&N's performance Ford F150 air intake, or they just jump right into it from the get-go. K&N offers a full line of air intakes and cold air intakes for the F-150, which includes black non-metallic and polished aluminum intake tubes. Regardless of your preference K&N's exclusive intake design is engineered to lower the air restriction created by the factory air box resulting in a guaranteed power gain, while providing outstanding air filtration.
K&N air intakes also provide a lifetime of use thanks to the washable and reusable cotton gauze filter element. These intakes are easy to install, usually requiring 90 minutes or less, and for that time investment you'll be reward with an increase ranging from an estimated 6 to a whooping 20 horsepower, depending on your engine option and air intake choice. That's why a large number of truck owners consider a K&N air intake a simple and inexpensive way to add power and performance to your F-150 pickup.
K&N air intakes are installed with common tools and they use factory mounting points when possible to make installation quick and easy. Several Ford F-150 air intake installation videos are available so you can see how easy installation is before you buy. View this video of an AirCharger air intake installation on 2011 & 2012 Ford F150 5.0L or visit the K&N installation video page to view more air intake installlation videos.
K&N offers Performance Wrench-Off Gold oil filters, Pro Series oil filters and washable, reusable oil filters by Pure Power. These Ford F150 oil filters afford the highest levels of protection against harmful contaminants and damaging debris, while allowing higher-flow rates. Almost all K&N Performance Gold oil filters come with a one inch nut welded to the top of the canister so they can be easily removed with a standard hand tool.
The housing on K&N's reusable oil filter, bypass valve and call plate are all CNC machined from Billet 6061 T6 aluminum, so under normal operating conditions, they are built to last the lifetime of your truck. Show your Ford F-150 just how much you appreciate all it does for you by upgrading to K&N.
Proud owners of a Ford F150 also use K&N's reusable cabin air filter to freshen and clean incoming air. Designed to control odors and capture most allergens including most mold, mildew, fungus, spores, bacteria, germs and pollen, K&N's cabin air filters help you and your family breathe easier and come with a 10 year/100,000 mile limited warranty.
K&N Air Intake Installed on a 2012 to 2015 Honda Civic Si 2.4L
Dyno Chart for the 69-1019TS air intake system
The Honda Civic has long been the beneficiary of Honda's legendary reliability and is one of the most affordable cars on the market. Safety, fuel efficiency and affordability are a few reasons the Civic has seen such popularity and has often become the first experience in driving for many teenagers. Its solid design and simple setup encourage drivers to make mild tuning and power modifications to the vehicle, and when done properly, the Honda Civic has some serious performance potential, especially when it comes to the Si trim level.
K&N Air Intake System for the 2012 to 2015 Honda Civic Si 2.4L
The K&N 69-1019TS Typhoon® air intake system provides an estimated gain of 10.5 horsepower at 5,200rpm and 9.2 lb-ft. of torque at 3,600rpm for 2012 to 2015 Honda Civic Si sedan models with a 2.4 liter engine. This high performance air intake system is specifically designed for the equally high performance Si trim level of the Honda Civic.
Air intake system 69-1019TS allows your engine to breathe easier and helps minimize restriction for more power and acceleration while it provides outstanding engine protection. Through use of K&N's high flow, oiled cotton gauze air filter, and streamlined intake tube, the Civic Si is no longer gasping for air.
This 2.4 liter Honda Civic Si air intake is designed with a heat shield, which isolates the air filter from warm air that surrounds the engine, and drives cooler air to the filter through a connection hose that attaches to the factory fresh air intake tube.
The K&N 69-1019TS is quite simple to install. The installation requires only minor hand tools and should take roughly 90 minutes. Additionally, this air intake will not void the factory warranty and it is covered with K&N's Million Mile Limited Warranty. If you are looking for a simple way to increase horsepower and acceleration in your 2012 to 2015 2.4 liter Honda Civic Si, you will want to make sure that you've equipped it with the 69-1019TS Typhoon air intake system.
The 69-1019TS performance air intake was designed to add power and torque to 2012 to 2015 Honda Civic Si models that have the 2.4 liter engine.
Dyno Chart for the 63-3078 intake on a 2012 Camaro V6.
The 2011 to 2015 and 2012 Chevy Camaro is one of the more unique looking vehicles on the market. Its styling blurs the line between the old school simplicity and new technology and technique. The engine options make the Camaro accessible to a larger market as well, appealing to fans who want the better fuel efficiency of a 6-cylinder motor as well as the visceral power of a large V8. The economical 3.6 liter, V6 engine, is the base model and the 6.2 liter, V8 engine, is the larger option, but this is no longer the age of the wimpy 6-cylinder motor. This engine puts out 323 horsepower at the crank, in the 2012 model, and yet still manages an EPA estimated 28 highway mpg. This is, essentially, a car that can be equally at home on the open road or at the track.
K&N Air Intake System for the 2011 to 2015
However, should owners of the Chevy Camaro want some additional power out of their 3.6 liter engine, K&N's 63-3078 air intake system is a simple performance add-on that's guaranteed to boost horsepower. 2012 models with the 3.6 liter engine can enjoy an estimated gain of 13 horsepower at 5,800 rpm and 14.4 lb-ft. of torque at 4,700rpm and the 2011 to 2015, 3.6 liter models can unleash an estimated 11.4 horsepower at 5,800rpm and 9.7 lb-ft. of torque at 4,700rpm with the 63-3078 air intake system.
K&N's 63-3078 air intake system completely replaces the Camaro's factory air box with a custom intake tube and high flow air filter that helps minimize restriction, allowing your engine to produce additional power and acceleration while protecting it from harmful contaminants.
Installation of K&N's Chevy Camaro air intake system requires only basic hand tools and no tuning or modifications will be needed to achieve additional power. It is protected by K&N's Million Mile Limited Warranty and is designed to last the life of your vehicle.
The 63-3078 fits the 2011 to 2015 Chevy Camaro with the 3.6 liter V6 engine.
As cars go there are very few vehicles that can boast the history and popularity of the Ford Mustang. Even now it remains on the market with an exceptional pedigree and a following that none can deny. The "Modular" 4.6 liter V8 was the engine of choice for Ford in the 2010 model year. This engine was a tried and true engine with many years of successful operation and it pushes a factory measured 315 horsepower at the flywheel. This car is an excellent example of what makes a muscle car work. The Ford Mustang continues to impress consumers, but this doesn't mean that we can't give it a little more kick than the pony car already possesses.
K&N Air Intake System for the 2010 Ford Mustang 4.6L V8.
The K&N 69-3526TP Typhoon series air intake system is K&N's contribution to the Mustang's power in 2010. Unleashing an estimated 9.5 horsepower, at 5000 rpm, and 9.3 lb-ft. of torque, at 4100 rpm, from the wheels of an already powerful car while providing outstanding engine protection, is no small feat. The additional horsepower is provided through K&N's own high flow air filter and intake tubing. The 69-3526TP air intake system also includes a protective air box which gathers outside air from the side of the radiator ensuring ambient or near ambient air temperatures into the engine.
Since this air intake needs only basic hand tools for installation, installing the intake system can be completed in about 90 minutes or less. The installation instructions are step-by-step and detailed with photos of each major portion of the installation process and they include a full parts breakdown of the system. These elements are all designed to make the installation easy and simple. If ease of installation and additional horsepower and torque wasn't enough, the entire 69-3526TP air intake system is backed by K&N's Million Mile Limited Warranty.
The 69-3526TP was designed as a simple performance upgrade for all 2010 Ford Mustang models equipped with the 4.6 liter V8 engine.
