The store will not work correctly when cookies are disabled.
We use cookies to make your experience better.To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
The 2007, 2008 and 2009 Mazdaspeed 3 comes with a turbocharged engine. The hatchback can convert from carrying four adults to a cargo hold by flipping the back seats. It is practical and fast.
K&N's 69-6011TS air intake system for the 2007, 2008 and 2009 Mazdaspeed 3
2007 Mazdaspeed 3 with a 2.3 liter turbocharged engine
K&N has developed a performance air intake system (69-6011TS) in powder coated silver for the 2007, 2008 and 2009 Mazdaspeed 2.3 liter turbocharged engine. K&N dynamometer tests show a stout 25.68 increase in power that customers can feel when they accelerate. All K&N air intake systems are designed to increase filtering capacity and improve throttle response while providing excellent filtration.
69-6011TS K&N air intake system installed in 2007 Mazdaspeed 3
Dyno chart for 2007 Mazdaspeed 3 shows a 25.68 horsepower gain
As air passes the K&N air filter (RU-4960), it travels through the silver powder coated aluminum tube which is attached to the throttle body. Our K&N air intake filters are washable and reusable and can go up to 100,000 miles before cleaning is required. It is protected from engine heat by a powder coated heat shield. The placement of the K&N air intake system ensures a steady amount of outside air to the engine which translates into more power.
The 69-6011TS
utilizes a CNC machined mass air sensor adaptor so the mass air sensor will work
with the factory stock settings. This means there is no need for re-programming
to run our air intake system.
It takes 90 minutes or less to
install this K&N air intake system. It is backed by the famous K&N Million Mile Limited Warranty.
K&N manufactures a wide variety of custom air filters designed to fit
your specific needs.
K&N's E-3551 round custom air filter.
K&N has released a round custom air filter (E-3551)
that is designed for increased airflow as well as excellent engine protection.
This air filter is designed to achieve high, virtually unrestricted air
flow while maintaining filtration levels critical to ensure long engine life. The E-3551 has an
outside diameter of nine inches and an inside diameter of eight inches in
addition to a height of 3.5 inches. The E-3551 can be used with K&N
nine inch
stainless steel custom assemblies.
K&N has been making washable/reusable performance motorcycle and ATV air filters since 1969. K&N
custom air filters feature an oiled cotton media and are backed by our one-year
limited warranty.
The K&N Apollo CIS (Closed Intake System) is a universal cold air intake system
incorporating a washable/reusable K&N High-Flow Air Filter in an enclosed housing.
K&N's RC-5052 replacement air filter for the Apollo Closed Intake
System.
K&N has released a unique replacement air filter (RC-5052) for
the
Apollo Closed Intake System.
This will allow Apollo owners the option of keeping an extra air filter to
rotate when the installed one gets dirty, allowing time to clean the dirty one
at their leisure. The
RC-5052 has a weight of 1.1 pounds (.5 kg). It has a height of 7.250
inches and a width of 7.125 inches.
K&N air filters are made from the durable, long lasting materials and are
designed for increased flow and outstanding filtration. K&Nair
filters employ an oiled cotton media that can be washed then re-oiled over and
over as needed. This air filter is backed by a limited one-year
warranty.
The World’s Fastest Rolls Royce stopped foot traffic at SEMA (Specialty Equipment Market Association) at the Las Vegas Convention Center in Nevada. Little Joe’s Street Rod Shop named it and put it on display in the show as an outside feature vehicle.
Luxury additions on the 1970 Silver Shadow include a leather trunk with matching battery covers and one of four television sets
Builder named 1970 Silver Shadow, The World's Fastest Rolls Royce
The 1970 Rolls-Royce Silver Shadow is a daily driver. The owner has two of the same models and wanted to do something wild with one of them. “He has a fascination with Hemi engines and wanted more power on his Rolls,” said Joe Richardson of Little Joe’s Street Rod Shop. “As a result the modified Rolls Royce is a plush luxury car with a huge motor.”
1970 Rolls Royce Silver Shadow at SEMA show in Las Vegas, Nevada
Rolls Royce Silver Shadow has a fuel injected 572 cubic inch Chrysler Hemi with a nitrous oxide system and a supercharger
It has a fuel injected 572 cubic inch Chrysler Hemi motor. There is also a nitrous-oxide system and a BDS 671 style supercharger for more power. “There is a K&N air filter on the end of the idle speed control motor,” said Richardson. ” Richardson ran the Hemi on a dyno and said he made 1350 horsepower.
The Silver Shadow went to Richardson as 6200 pounds of unibody stock. “We cut from bumper to bumper and rocker to rocker,” he said. “We had to gut the car for a complete aftermarket chassis.”
Other modifications are:
Chris Austin Chassis
Air Ride
Full Leather Interior by Hot Rod Interiors
Billet Specialties Riviera Wheels
Billet Specialties Rail Steering Wheel
Brakes by Wilwood
Air unit by Vintage
Full Power Options
Four Television Sets
Nitrous
“All the suspensions from Chris Austin Chassis are either chrome plated or polished stainless,” said Richardson. “The entire roll cage is hand stitched leather. It’s made like a baseball stitch and is very time consuming. It took 8 hours to do one single bar and five months to finish the interior.”
The Silver Shadow has stock bumpers, door handles, and lights. “We received all expenses paid invitations
from corporations at SEMA to tour car shows in Germany, France and Canada,” said Richardson. “Rolls Royce is making a comeback.”
The Harley Davidson Touring lineup has a list of improvements, including a new frame and swingarm. Its new Isolated Drive System is only part of the package.
K&N custom intake assembly RK-3930 for Harley-Davidson Touring Models
K&N has released a new high flow custom intake assembly (RK-3930) for all 2008, 2009, 2010, 2011 and 2012 Harley-Davidson Touring Models. See the complete list of motorcycles below. It is designed to fit neatly behind your Touring Model’s air filter cover as it provides a substantial increase in airflow resulting in additional horsepower and torque.
The RK-3930 includes an oversized original high flow air filter which provides an extra large filtration area while offering longer service intervals. This filter, like all K&N original high-flow filters is washable and reusable, pre-oiled and ready to ride.
A Bump-Seal is used at the base to provide a perfect seal. The cast aluminum backing plate includes built-in, internal breathers. A bolted-in, dyno-tuned velocity stack increases airflow velocity into the throttle body.
Spacers and hardware are included to
mount your stock Harley Davidson air cleaner cover. Fuel management modifications are not necessary to obtain increased performance.
Covered by our famous K&N Million Mile Limited Warranty, it will be the last air filter your motorcycle will ever need.
